列印對折貼標機AFD-1181-8DG

機器優點：

一、伺服電機精確定位；

二、德國SICK標籤電眼快速感應標籤尺寸；

三、合理的力學結構設計保證標籤出標順暢穩定； 人性化完美結構設計；

四、應用方便，可大範圍調整，實現不同規格線材線束產品上對折貼標；

五、調機不用扭動螺絲，直接在顯示幕輸入標籤尺寸，線徑尺寸即可；

六、可以選擇標準機型或是新增自動下料功能，速度翻倍；

七、提高生產效率，解决人手貼標慢，精准度不够，人員變動及人工成本高等優勢；

八、機器自帶調整功能，只要裝好標籤便可馬上正常使用，無需調機，解决舊款機器調機難，不會調機，浪費大量標籤，需要專業工程調機等，效能相當穩定，不管是標籤自身公差比較大都能自動調整OK，達到零公差要求，生產過程中無需再調整；九、新增列印功能，列印貼標同時完成，針對標籤內容不同貼標。

I. Precise positioning of servo motor;

2.Germany SICK label electric eyes fast sensing label size;

3. Reasonable mechanical structure design ensures smooth and stable label labeling; Humanized perfect structure design;

4. easy to use, can be adjusted in a wide range, to achieve different specifications of wire harness products on the fold

labeling;

5. adjust the machine does not need to twist the screw, directly input the label size, line diameter size can be;

6.you can choose standard models or increase the automatic blanking function, double the speed;

7. Improve production efficiency, solve the advantages of slow manual labeling, insufficient accuracy, personnel change

阿凡達設備 and high labor cost;

8. The machine has its own adjustment function. As long as the label is installed, it can be used normally immediately

without adjusting the machine. It is difficult to adjust the old machine, will not adjust the machine, waste a lot of labels, need

professional engineering to adjust the machine, etc., the performance is quite stable, whether the label tolerance is more

can automatically adjust OK, to achieve zero tolerance requirements, no need to adjust again in the production process;

9.The printing function is added to complete printing and labeling at the same time. Labels are affixed according to different

label contents.

1.貼標精度：±0.2（不含產品、標籤誤差）；

2.貼標速度：1000-1800pcs/H； （取决標籤尺寸及人工操作速度）

3.適用產品：各類圓線、扁線、水管等產品通用

4.適用標籤尺寸：標準機型長度：20mm～100mm； （超出範圍定制）

5.適用標籤尺寸：標準機型寬度：5mm～45mm； （超出範圍定制）

6.配寘標準定位尺：15-200MM隨意調整（超出範圍定制）

7.整機尺寸：約580mm×480mm×1200mm（長×寬×高）；

8.適用電源：220V/50HZ； 功率0.25KW

1.Accuracy: ±0.2(excluding product and label errors);

2.Speed: 1000-1800pcs/H; (depends on label size and manual operation speed)

3.Products: all kinds of round wire, flat wire, water pipe and other products are universal

4.Label size: standard model length: 20mm ~ 100mm; (Customized beyond the scope)

5.Label size: Standard model width: 5mm ~ 45mm; (Customized beyond the scope)

6 standard positioning: 15-200mm free adjustment (beyond the scope of customization)

7. Machine size: about 580mm×480mm×1200mm (length × width × height)